Equipped with a safety control sensor, the First in the world (Patented).
FEATURES
-
The POWER switch is automatically turned off to secure safety.
-
Energy saving function is provided. The heater temperature is dropped to the READY level during standby. (The temperature is auotmatically reset when the operator picks up the iron.)
-
If the operator starts working before the iron tip reaches the set temperature, the buzzer sounds.
-
Temperature control lock using codes is possible.
-
Leak current is minimized due by using a 24V heater.
-
Proportion control, selection of turning on and off are possible.
-
The temperature of the iron tip can be set freely from 200 to 450°C.
-
Temperature units displayed can also be changed between °C and °F.
-
The heater temperature rises very quickly.
-
Any trouble is including heater burn-out, abnormal temperature, sensor burn-out and short circuiting, and the power is automatically disconnected after one minute.
-
Sufficient countermeasures have been provided to prevent Electrostatic Discharge (E.S.D.).
-
This item has a current CE Marking approval.
|
Temperature warm-up property of iron tip |
|
|
Only 20 seconds to 300°C!
Surprising temperature warm-up
The table shows the results of the test on the "heater temperature warm-up property" of the UNICON-107(S).
Look at the excellent "high-speed heating". It takes only some 20 seconds for the tip of the iron to warm up to the optimum temperature of 300°C after the switch is turned on. This marvellous high-speed heating property is sure to help widely improve your production efficiency and acceptance rates of your products.
|
|
Standard constitution |
|
Product code |
UNICON-107SF |
UNICON-107MF |
|
Heater power |
50W |
70W |
|
Main body |
U107F-ST |
|
Handpiece |
U107SN-HD |
U107MN-HD |
|
|
*The other accessories for standard package: handpiece bench stand, cleaning sponge and one iron tip (selectable). |
|
Station unit |
|
Product code |
U107F-ST |
Outline dimensions
*1 |
135(W)85(H)170(D)mm |
|
Weight |
3kg |
|
Input power |
AC100V / 115V / 220V 10%, 50/60Hz |
|
Output voltage |
AC24V |
|
Temperature range |
200 to 450 |
|
Temperature accuracy |
10 from setting values |
|
Power cord |
2m |
|
|
Hand piece |
|
Product code |
U107SN-HD |
U107MN-HD |
|
Heater power |
50W |
70W |
|
Full length *2 |
215mm |
225mm |
|
Weight *2 |
70g |
90g |
|
Sensor |
Type K Thermocouple |
|
Tip-to-Ground Resistance |
Less than 2 |
|
Cord |
1.5m |
|
|
*1 Excluding protrusion and cord |
*2 Excluding cord
|
Whatsapp us today!
